Is that a new battery or a new mobile phone in charge for the first time need to run again with all the power, so three times, and shall be filled with the mobile phone charge only after unplug the power supply, in fact, both is not correct, the current smartphones are lithium-ion batteries, lithium-ion battery has no memory effect. The life and capacity will not be affected if not fully filled or not used up. There is no such thing as a battery that needs to light up on its first charge. Here are some ways to avoid damaging your battery:

 

1. Avoid excessive discharge, and try not to use the mobile phone under 20% of the battery, especially do not use the mobile phone under 5% of the battery, which will cause irreversible damage to the battery.

 

2. Avoid excessive charging. Excessive charging will cause great harm to the lithium battery of mobile phones.

 

3. Avoid using in high temperature or very low temperature. Charging in high temperature and low temperature will cause great damage to the lithium battery of the mobile phone.

 

4.Avoid leaving your phone's battery dead for long periods of time.

 

5. The ideal state of lithium battery is when there is 40% of the battery left. At this time, the battery voltage will not be too high or too low, and the higher the battery, the faster the decline. Don't keep your battery at 100% for long periods of time.

 

The best way to maintain a lithium-ion battery is to use it lightly, avoid overcharging, and keep the phone's battery at 20%-100%.

 

For new polymer battery, because the battery in place after a period of time will automatically enter a dormant state, when the polymer battery capacity is very low, and will also affect the use time of the battery, at this time, the polymer battery can be three to five times the normal charge and discharge, such a cycle, you can proceed to activate cells, and will return to normal capacity; In addition, in the charging process, it is only necessary to charge the battery three times before charging without overcharging or overdischarging the battery, about half an hour after charging the polymer battery, and overcharging and overdischarging will have certain impact on the battery, thus affecting the service life of the battery.

 

 

Polymer battery charging considerations

 

Except in accordance with the above methods of polymer battery, other improper operation will affect the service life of polymer battery, such as, using the don't match with polymer battery charger, which affect or damage to the polymer battery, so, in the process of filling, try to use the original charger, and the best way of charging for the polymer battery is slow filling, if you want to charge as soon as possible, so that repeated charge and discharge will also affect the battery life.

 

When our mobile phone is out of power, we need to charge the battery. In this way, we should first find a special charger for the original mobile phone. Otherwise, it is easy to damage the battery during charging due to incompatibility or other reasons. And now we all know that mobile phone support quick charge function, but small make up needing those who remind everybody is here, if we don't have a particularly urgent things, that we at the time of charging it is best to use slow filling, it can maximize guarantee the life of the battery.

 

While our mobile phones, if long time need not our polymer lithium-ion batteries in the first place after it is fully charged the electricity, and when we will after the battery full, don't put the battery on the charger, if long time don't we use lithium polymer battery, so it may lead to separation occur between battery and mobile phone, which affects the performance of the mobile phone.

 

Lithium polymer battery features

 

Compared with lithium ion batteries, lithium polymer batteries have the following characteristics:

 

1. Relatively, the problem of battery leakage is improved, but not completely.

 

2. Can be made into thin battery: with a capacity of 3.6V250mAh, its thickness can be as thin as 0.5mm.

 

3. The battery can be designed in various shapes.

 

4. Can be made into a single high voltage: liquid electrolyte battery can only be a few batteries in series to get high voltage, and polymer battery because of its own no liquid, can be made in a single multi-layer combination to achieve high voltage.

 

5. Discharge power, theoretically 10% higher than a lithium-ion battery of the same size.

 

Can lithium polymer batteries explode

 

Polymer lithium batteries, once a safety hazard, will not explode, only bulge. In terms of safety, the outer package is aluminum plastic package, which is different from the metal shell of liquid lithium battery. The hidden quality problems inside can be immediately revealed through the deformation of the outer package. Once the hidden safety problems occur, they will not explode but swell.

 

At present, the majority of domestic polymer batteries are just soft-pack batteries, with aluminum plastic film as the shell, but the electrolyte has not changed. This kind of battery can also be thinned, and its low-temperature discharge characteristics are better than polymer battery, and the material energy density is basically the same as the liquid lithium battery, ordinary polymer battery, but because of the use of aluminum plastic film, so lighter than the ordinary liquid lithium battery. Security, when just boiling liquid soft package of battery aluminum-plastic film naturally bulge or rupture, also won't explode.